Australian Spa Parts

Suits Gecko Microspa 10A packs, Hydroquip 718 spa packs and other applicationsTeflon coated for longer life

Balboa logic jumper on a stickHandy test tool for Balboa Electronics and other brands utilising similar logic jumpers and sensor connectors on their circuit boards and sensor leads. Allows easy testing / checking...

240v/10v 12 pin (4 wire) Balboa transformer - suits Sig 10L, Sig 100, Sig 200, LA Spas pcb's, and other TUV pcb's.

Gecko Electronics Dtec-1 pressure switchPilot duty rated pressure switch 1A, 24v max 1/8" NPT thread1.5 psi  SPST

Gecko MSPA-1 Heater mounted overtemperature hi-limit sensor

25mm hole size required to be installed above maximum water levelUse Floating remote control handset on MSPA-MP spa controllers

2A, 250v glass fuse20mm long x 5mm diameter.All fuses are tested prior to dispatchFuses carry no warranty due to their consumable nature - these fuses have been tested for continuity and are operable.Do not replace a...

500mA, 250v glass fuse20mm long x 5mm diameter.All fuses are tested prior to dispatchFuses carry no warranty due to their consumable nature - these fuses have been tested for continuity and are operable.Do not replace a...

6.3A, 250v glass fuse20mm long x 5mm diameter.All fuses are tested prior to dispatchFuses carry no warranty due to their consumable nature - these fuses have been tested for continuity and are operable.Do not replace a...

Gecko heater cable screw - suits SSPA and MSPA systems.

Gecko pcb mounting screw

Main in-water temperature probe - used on Microspa, SSPA and MSPA gecko electronics spa packs. Not used in older MSPA-1 spa packs (white metal boxes - but don't confuse with USA supplied Spa builders SSPA white boxes, which...

Connects remote circulation heater flow or pressure switch to Gecko SSPA or Spa Builders S Class system boards.

Used on Gecko SSPA or Spa Builders S Class flow through heater systems to connect internal pressure switch to pcb

Gecko USPA Microspa water sensor probe

Combination gasket and o ring in one for superior seal - installed each end of the heater tubeCan be used on many brands with similar mounting - suits Gecko, Hydroquip, Balboa, Aquatemp, RMF, etc Sold as a...

Hydroquip High Limit Temperature Sensor. 2 wire, 2 pin connector, 18". Mounts on heater tube.

Laing Infinity 2.0kw circulation style heater to suit Gecko Electronics SSPA spa packs and many other circulation heater applications. Includes thermal hi limit and pressure switch.|Used on Heritage Spas, Lanark Spas,...

SC - 15  15A slow blow fuse 36mm long x 10mm diameterAll fuses are tested prior to dispatchFuses carry no warranty due to their consumable nature - these fuses have been tested for continuity and are operable...

SC - 25  25A slow blow fuse 41mm long x 10mm diameter used on Balboa, Gecko and othersAll fuses are tested prior to dispatchFuses carry no warranty due to their consumable nature - these fuses have been tested...

6 pole terminal block - suits LX-25/30 pcb's and others

LX-30 eprom chip - for use with LX-30 systems, and also as a RETROFIT for use with obsolete LX-25 topside panels pictured above, in conjunction with a new LX-30 topside panel listed above. Replaces the LX-25 eprom chip...

'Fire Cracker' same sized temperature and hi-limit sensors with pressure switch wiring harness

Spa Builders circuit board power transformer - suits LX-25, and LX-30 pcb's.220-240v, 50/60Hz

SpaNET XS series heater sensor wiring harness assemblyIn-heater temperature and water presence sensors PCB mountedSuits all SpaNET controller models

Power transformer for Spaquip Spa Power 750 / 1000 controllers240v input, 12v output, 4ACan also be used to operate 12v spa lighting to a maximum load of 4A (48w)

Compact 'Encased Style' Circuit board relay commonly found on Balboa Instruments PCB's.Ratings - Coil - 6v DC, contacts - 240v AC, 30A.Other coil voltages availableSPST - single pole, single throw.PCB solder contacts...