Australian Spa Parts - Spaquip / Davey spa pump wet end parts

Spa pump wet end parts for Davey / Spaquip spa pumps 
Scorpio, Magnum, Monster, Maxi-flow, QB series



2" Spa Pump Union Split Nut - Repair Fitting

SKU: mp0121109020

Magic Plastics 2" pump union split nut repair fitting. 2" FPT thread to suit 2" MPT threaded pumps or fittings. This split nut can be used to replace a broken pump union threaded nut without the need for ...

572 In Stock

$15.40

Davey Celsior A & AB Airswitch Assembly

SKU: dcelsioras

Davey Celsior bath pump airswitch assembly - suits the following pump models: Celsior C200A, C200AB, C270A, C270AB, C400A and C400AB Comprises 2 parts: 13065 lock nut 48998-1 latching air switch Latching rel...

4 In Stock

$84.70

Davey QB Series 2.5hp / 1850w Variable Speeed Pump impeller with Keyway - suits QB25013 only

SKU: sqb358-02CT

Davey QB Series 1850w / 2.5hp impeller to suit QB25013 variable speed pump only. This is a unique impeller that has a keyway that slips over the motor shaft that has a long key. (it is NOT threaded) A sep...

$121.00

Out Of Stock

Davey Spa Pump Union Assembly

SKU: d31451

Davey spa and bath pump union. Suits Spaquip / Davey Xcelsior spa pool and bath pumps, Davey Celsior bath pumps, Davey XS series spa & bath pumps Sold individually - comprises lock nut, o-ring and tail piec...

3 In Stock

$33.00

Davey Spaquip QB Series 2.0hp / 1500w Impeller

SKU: sqb351-04b

Davey Spaquip QB Series 1500w / 2.0hp impeller - used in QB series pumps - single and 2 speed. 106mm diameter x 6 vanes @ 13mm wide vanes. Stamped on the back with B351-04 (not always)...

196 In Stock

$60.50

Davey Spaquip QB Series 2.5hp / 1850w Impeller

SKU: sqb358-02b

Davey Spaquip QB Series 1850w / 2.5hp impeller - used in QB series pumps - single and 2 speed. 112mm diameter x 6 vanes @ 14mm wide vanes. Stamped on the back with B358-02 Do NOT confuse with other imeller s...

137 In Stock

$60.50

Davey Spaquip QB Series 3hp/2200w impeller

SKU: sqb358-02c

Davey Spaquip QB Series 2200w / 3hp impeller - used in QB series pumps - single and 2 speed. 120mm diameter x 6 vanes @ 13mm wide vanes. May be stamped on the back with B358-02 Do NOT confuse with other imel...

61 In Stock

$60.50

Davey Spaquip QB Series Pump Body / Casing O-ring

SKU: sqd16335

Davey Spaquip QB serties pump body o-ring seal...

139 In Stock

$17.05

LX Whirlpool & Hydromassage Carbon / Ceramic Mechanical Seal Assembly

SKU: lxlp-002

LX Whirlpool LP, WP, EA, TDA, JA series pump mechanical seal assembly - Suits all generic post 2007 LX Whirlpool & Hydromassage pumps except: DH1.0 pumps pre 2017 Sundance/Jacuzzi LP or WP series pumps that ...

540 In Stock

$39.60

LX Whirlpool Hydromassage JA/LP/WP/TDA/EA Series Silicon Carbide Mechanical Seal Assembly

SKU: lxscscv

Premium Silicon Carbide LX Whirlpool Hydromassage JA, LP, WP, EA, TDA series pump mechanical seal assembly Suits LX JA35, JA50, LP200, WP300, TDA100, EA450Y etc. Also suits: Spaquip QB series pumps and ...

22 In Stock

$66.00

Mechanical Seal Assembly 5/8" Booted Cup with 3/4" Ceramic / Carbon

SKU: sqsb16

Mechanical Seal Assembly - suits Spaquip QB series pumps, Spanet XS-30, Spanet XS3c,, most LX pumps. Consists of a 5/8" cup seal with a light spring, combined with a rubber L seal, and a 3/4" standard cerami...

$64.30

Out Of Stock

Spaquip 40mm threaded, 50mm Spg x 40mm Skt Heater Tee Male Tail Union Body

SKU: sq4108

Spaquip / Davey 'male tail' threaded union section with 50mm/2" spigot x 40mm/1.5" socket. Thread size is 40mm union size (approx 70mm OD) This is a specialty component used on (and supplied with) Spa Pow...

4 In Stock

$18.70

Spaquip 40mm Union w/40mm Tail Socket

SKU: sq411441094110

40mm Spaquip Pump union / heater union - Suits Scorpio and Magnum pumps, and Spa Power 500 heaters Comprises tail, nut and o-ring...

12 In Stock

$25.30

Spaquip 50mm Union w/50mm Tail Socket

SKU: sq511251135114

50mm Spaquip Pump union / heater union - Suits Monster and Maxi Flow pumps, and all Spa Power heater barrels (600, 601, 750, 800, 1000, 1200) Comprises tail, nut and o-ring...

24 In Stock

$28.38

Spaquip Magnum Front Casing O-Ring

SKU: sq6575

...

3 In Stock

$12.43

Spaquip Maxi Flow 1.5hp Impeller - Discontinued

SKU: sq6856

DISCONTINUED Davey Spaquip Maxiflow 1.5hp impeller to suit 14mm diameter motor shaft 100mm diameter, 13.7mm vane width, 5 x vanes NB. Alternate version with larger thread to suit 16.5mm motor shaft diame...

Spaquip Maxi Flow 2hp Impeller - Discontinued

SKU: sq6854

DISCONTINUED 105mm diameter, 13.4mm vane width, 5 x vanes - 14mm shaft diameter version ONLY 16.5mm motor shaft version no longer available - ensure you measure the motor shaft diameter before ordering ...

Spaquip Maxi-Flow Pump Body / Casing

SKU: sq6821

Davey Spaquip Maxiflow pump body / casing Note that there are no longer any impellers or seal plates to suit these pumps. Replacement pump recommended. ...

2 In Stock

$226.60

Spaquip Maxi-Flow Seal Plate - Suits AO Smith or Magnetek Motors

SKU: sq6819

DISCONTINUED - LIMITED TO STOCK ON HAND Pump seal plate to suit Spaquip Maxiflow pump with AO Smith or Magnetek 48 frame smooth motor. ...

1 In Stock

$145.20

Spaquip Maxi-Flow Seal Plate - Suits Fasco Motors

SKU: sq6820

DISCONTINUED - LIMITED TO STOCK ON HAND Pump seal plate to suit Spaquip Maxiflow pump with Fasco motor. ...

$145.20

Out Of Stock

Spaquip Maxiflow 2.5hp Pump Impeller - Discontinued

SKU: sq6855

DISCONTINUED 113mm diameter, 12.7mm vane width, 5 x vanes 14mm shaft diameter / thread Alternate version with 16.5mm shaft impellers are now obsolete - not available ...

Spaquip Maxiflow 3hp Pump Impeller - Discontinued

SKU: sq6853

Discontinued Common size used on Signature spas, Lanark Spas and others 113mm diameter, 15.7mm vane width, 5 x vanes Suits 14mm motor shaft diameter (16.5mm motor shaft suited impellers NLA - a replacemen...

Spaquip Maxiflow Pump Body O-Ring Seal

SKU: sq6581

...

1 In Stock

$19.25

Spaquip Monster 2hp Impeller 14mm shaft only

SKU: sq6528

NO LONGER AVAILABLE Suits Monster Pump - takes 3/4" standard seal. 132mm diameter, 8mm vane width 16.5mm shaft impellers no longer available ...

Spaquip Monster Pump Diffuser

SKU: sqq6529

...

1 In Stock

$46.20

Spaquip QB Series Plug / O-ring

SKU: sqb351-09a

Davey Spaquip QB series pump drain plug/o-ring - suits QB and QB AUS series. NB Does not suit LX or Spanet Jetmaster pumps. ...

5 In Stock

$9.90

Spaquip QB Series Pump Body

SKU: sqb445-02b

Spaquip QB Series Pump Body Discharge thread suits Spaquip 50mm union ONLY 4 x mounting bolts - measurement diagonally between 2 mounting points 148.5mm The part number B445-02 is stamped inside the part. ...

1 In Stock

$218.90

Spaquip QB Series Pump Suction Cover / Faceplate

SKU: sqb445-01

Spaquip QB series pump face plate. The part number B445-01 is stamped inside the part. The union thread on this faceplate suits Spaquip 50mm unions ONLY. Very early QB pumps were sold with the original LX 2...

1 In Stock

$137.50

Spaquip QB Series Pump Union Assembly

SKU: sq32569

Davey/Spaquip QB Series 2" pump union assembly Similar in appearance to Waterway and Aquaflo, but shorter thread with different pitch - do not match Marked on the threaded ring "WORLD'S FINEST 2" D ABS" (w...

3 In Stock

$31.90

Spaquip Scorpio Pump Body O-Ring

SKU: sq6031

Davey Spaquip Scorpio pump body o-ring...

1 In Stock

$13.20