Hot Tub Specific Parts - Jets and Fittings

Cedar / Timber Hot Tub and Marble Spa Jets and Fittings including Strip Skimmers, Suctions and Air Blower Loop Wall Fitting Assemblies & Lights - with longer wall fittings to suit thick cedar and marble walls - spas,spa pool, hot tub, jacuzzi
Because most hot tubs and marble baths have wall thicknesses up to 1.5" or 40mm (the vast majority of spa jets which are designed for 3-15mm thick acrylic spa shells), they require specially built jets with extended threaded wall fittings. Unfortunately, availability and variety of these jets is declining with the increased popularity of acrylic portable spas.
Listed here are the only available Hot Tub specific fittings available. Not all will suit every application.
Hot Tubs are generally manufactured from Cedar, Redwood, Jarrah, and some other timbers - usually found as Cedar Hot Tubs in Australia.

	Hydroair Hydro Jet Hot Tub Spa Jet The only available Timber Hot Tub Jet for thick wall applications Suits Marble and Timber Tubs 60mm D hole required, up to 45mm timber or marble thickness 1.5" / 40mm water x 1.5" / 40mm air, Air can also be perpendicularly installed 1/2" / 15mm pipe.		Price:	QTY:

	Hydroair Carousel Rotating Eyeball - Polaris 3-1-1 Carousel rotating eyeball - 1.5" threaded - spa or pool jet return Mechanically driven by water flow - geared spocket drive. 51mm diameter, 47mm diameter thread (1.5") Will fit any pool or spa return / jet with a 1.5" thread. Suits Hydroair Hydrojets. Upgrade from standard directional eyeballs.		Price:	QTY:

	Waterway Poly Jet Extended Wall Fitting Longer than normal wall fitting to accomodate thicker wall - maximum thickness approx 32mm		Price:	QTY:

	Waterway Poly Jet Body 3/4"x3/8" RB 65mm hole required 3/4" x 3/8" hose connections		Price:	QTY:

	Waterway Poly Jet Internal - Adjustable Most suitable jet internal for hot tubs due to the depth of the body. Other standard poly jet internals can be used. The deluxe range is not suitable due to the depth of the body.		Price:	QTY:

	Hydroair Hot Tub Air Blower Loop Wall Fitting Hydroair Hot Tub Spa Air Blower Loop Wall Fitting Assembly Hole size required - 60mm D Designed for 40mm / 1.5" pipe to loop around the hot tub, usually under the seat, drilled for air blower injection. Extended wall fitting suitable for tub or marble wall thickness up to 45mm Standoff Distance - from timber tub wall to outside of the loop pipe - as little as 50mm. 50mm, 90 degree Ell body, internal Tee assembly threads into hot tub wall fitting for easy installation and service. Simply plumb a loop of pipe around the tub from one end of the Tee to the other, and drill out the loop to suit.		Price:	QTY:

	Hydroair High Volume Hot Tub Spa Suction Only available Timber Hot Tub suction fitting with long wall fitting 60mm D hole size, up to 45mm timber thickness		Price:	QTY:

	Hydroair Strip Skimmer Assembly - Hot Tub - White Especially designed for use on marble and timber hot tubs with extra thick walls Surface strip skimmer which compises seperate wall fitting and cover grill. The grill is held in place by the top screw and the threaded perferated insert. 266mm high, 101mm wide, 25mm deep. Requires hole size - 60mm 90 degree elbow 1.5" / 40mm socket connection Maximum wall thickness - 40mm		Price:	QTY:

	O'Ryan Timber Hot Tub Light Fitting Brown spa light fitting suitable for use in timber hot tubs with thick walls. Accomodates standard or LED lamps. Must be installed above ground. Rear of housing should be weather protected. Light globe / cable harness / globe holder assy should be purchased seperately. Hole size required - 60mm		Price:	QTY:

	Light Lead & Wedge Lamp Socket Standard spa light lead and socket - suits all wedge style lamps and LED lights except MR16 lamps.		Price:	QTY:

	12V, 12W Lamp GE912 Standard 12W lamp - push in wedge base		Price:	QTY:

	Sloan LiquaLED Ultrabrite 12 LED Light Controller Lamp Sloan LiquaLED Ultrabrite LED Lamp with 12 multicolour LED Cluster - super bright - equivalent to 16+ LED's. This is a stand alone 12v AC lamp that fits any normal bayonet style spa light housing, complete with cable to connect to 12v ac light output on spa pack, or transformer. Additional LiquaLED lights can be run from and simultaneously controlled by this lamp with the addition of the expansion cable and LiquaLED lights to suit your needs. This is a stand alone LED lamp with integral control - multiple LED outputs - NOT used with or requiring the LiquaLED Control 40 controller. Maximum load for added LED lights: 12v DC output, 240mA ie Add 1 x 21 LED lamp (240mA) or 1 x 14 LED lamp (160mA), or 3 x 7 LED lamps (80mA ea) or 3 x Quad cables (80mA ea), or 6 x Dual cables (40mA ea) or 4 x Single cables (50mA ea) or a combination to a maximum of 240mA loading, such as 2 x 7 LED lamps (160mA) + 2 x Dual cables (80mA) = 240mA 40mm diameter lamp suits most spa light fittings of most sizes - with bayonet lamp holder mounting back plate.		Price:	QTY:

	PAL 2000SP Hot Tub Spa Light Fitting PAL 2000SP spa and hot tub light - Timber hot tub & spa light fitting suitable for above ground, and in-ground spas (rear of light fitting is fully waterproof preventing moisture and contaminents entering from surrounding soil) Supplied with 12v, 20w Xenon high output, 5,000 hr lamp, transformer and 5m lead/plug. Any of the MR16 LED lamps listed under the Light category can be fitted to this hot tub light. 84mm diameter face, 50mm hole size, suits up to 50mm wall thickness (ideal for hot tubs)		Price:	QTY:

	S&P Ultra Hot Tub Spa Jet - Brown OBSOLETE 76mm diameter face, 48mm hole required. Suits timber or marble up to 50mm thick 40mm water x 15mm air			Sorry ... Obsolete!

	S&P Turbo Hot Tub Spa Jet Limited stock in brown and white. 3 x brown, 3 x white left		Price:	QTY:

	S&P Turbo Hot Tub Spa Jet Wall Fitting Convert a standard S&P Turbo jet into a Hot Tub jet with this wall fitting.			Sorry ... Obsolete!