Edgetec Silhouette Replacement Jet Internal Kit - Chrome - WITH Tools
19 In Stock
Notify me when back in stock
Edgetec Silhoutte - 65mm diameter replacement kit with tools
Changeover kit to Trio - Adjustable - chrome - spa bath jet - 72mm diameter
Adjustable directional jet.
Existing Silhoutte jet face needs to be unscrewed from the bath with a special tool.
Once unscrewed, the threaded wall fitting of the Trio Jet is threaded in with its different special tool. Seal with silicone.
The jet face assembly of the Trio Jet is then pushed into the jet body.
If you are replacing more than one Silhoutte Jet, you will need 1 of this kit for the tools, and the remaining quantity of e2035-ch-R Trio Jet face / wall fitting sold separately.
NB - the jet bodies used with this series of jets is plumbed with very flexible tubing - do not apply excessive pressure toward the bath or the body may break its silicone seal away from the rear of the bath and dislodge. This may result in the need to access the underside of the bath to resolve.
Also note that the tool for removal is really only designed for installation. Due to the large face of these jets, often a lot of silicone seals these to the bath. The tool may snap in the attempt to remove. It is not warranted against breakage (due to not being a removal tool).
Chrome is a coating applied through electrolysis to a base material such as brass or plastic. These parts are chromed plastic