Spaquip 1.5kw, 10A or 2.0kw 15A Spa Power 400 Controller, Touchpad Remote Heater Assembly - Pulsar, 2095 & Intuitive Series Retrofit

Spaquip Spa Power 400 replacement system

Spaquip / Aquaswim / Aquapacific Pulsar Series (1, 2, 3 and 4 button touchpads without displays) and 
Spaquip Intuitive Series (7 button touchpad with LED bar temp indicator display) spa control system replacement retrofit

Utilises Spa Power 601 system touchpad and circuit board technology, in conjunction with special teflon coated heater element compatable with 50mm pulsar series heater tee, but also supplied with 50mm heater tee to replace existing 40mm heater tees in spas with that option. 
Supplied with necessary adaptor cables to suit 1 x 1 speed pump and blower. (other cords at extra cost eg 2 speed pump or 2nd pump cord)

Straight replacement for Pulsar series and Intuitive series 1 x single speed pump and blower systems, or - with a new variable speed air blower, you can use 2 x single speed pumps or a 2 speed pump. 

Only exception - the blower on original systems was 3 speed, the Spa Power 400 operates the blower as single speed only, unless fitted with the optional variable speed blower instead. A minor drawback! 
Other options include capability for - 2 speed pump (w/variable speed blower only), ozone, LED (only) light, or 2nd pump in place of the airblower. 
Please contact us with regards to suitability as a replacement for your spa's system prior to ordering

NB. Will NOT suit replacement of Pulsar and 2095 series systems fitted with 2 pumps plus blower


System configurations when replacing Pulsar or 2095 series controller and re-using existing pump(s) and blower:
1. One x single speed pump and air blower = single speed
2. Two x single speed pumps BUT new variable speed blower is required
3. One x 2 speed pump and variable speed blower

(when 2 single speed pumps or a 2 speed pump is used, the only blower thant can be fitted is the SQ5602 variable speed air blower - no other blowers can connect)