Australian Spa Parts

Edgetec suction Australian approved flow rate of 192lpm

Approved flow rate of 192 lpm

60mm hole size required40mm socket

Surface strip skimmer which compises seperate wall fitting and cover grill. The grill is held in place by the top screw and the threaded perferated insert. Standard length wall fitting. White or Grey266mm high, 101mm wide,...

Replaces the original 3 vane version used by Stylus.

Replaces many spa bath suctions for chrome upgrade - replaces both plastic and metal suction covers with 3 screws from S&P and Onga  - 40mm thread (approx 48mm OD)Australian Approved flow rate of 168 litres per...

S&P Supa Suction - White with 40mm slip fit.85 x 100mm faceplate OD, 48mm ID slip (40mm pipe) x 59mm OD thread. 60mm hole size required Australian Approved flow rate of 192 litres per minute. Caution - many pumps...

Spa bath suction fitting warning label decal - marked with mandatory safety information Oval shape 84mm wide x 52mm high Stick either on the suction fitting or bath adjacent to the suction...

Waterway 2.5" / 65mm sweep elbow - socket x spigot. Suitable for suction fittings, pump connections, etc to maximise flow

Waterway 3.5" Suction fitting suits low flow circulation pumps. LOW Flow rated to 75 litres per minute NOT suitable for any pump other than a low flow circulation pump such as an ITT Laing E-10 - if you need...

Waterway 3.5" Ultra Hi-Flo suction with 90 degree elbow & 2" socket Flow rated at 454 lpm 60mm diameter hole required, 94mm cover diameter, 50mm projection into spa. 

Waterway 32" Ultra Strip Drain / Suction - white for use in concrete pools / spas with field built sumps Wall mounted - flow rated at 1120 lpm with two portsFloor mounted - flow rated at 1330 lpm with two ports850mm...

Waterway 5" Super Hi-Flo suction fitting with stainless steel cover rated at 681 lpm flow 2" / 50mm Socket. 

Waterway 5" Super Hi-Flo suction with 2.5" Spg x 2" socket 90 degree elbow adaptor. 950 lpm rated in self contained portable spa, 680 lpm rated in all other applications 130mm diameter cover, 38mm projection into...

Waterway 5" super hi-flo 2.5" suction fitting with 2" socket adaptor vacuum break 90 degree elbow. Vacuum break 3/4" barb connection MUST be correctly connected and activated to achieve higher flow rating of 878 lpm

Waterway 5" super ultra hi-flo suction fitting with 2.5" / 65mm socket for plumbing connection. Rated to a MASSIVE 999 lpm for applications where installed in portable spas or swim spas. Perfect for swimjet systems. Other...

Waterway 6" Ultra Suction - white, black or beige - self aligning slip fit design to glue inside Australian 50mm pressure pipe. stainless screw included to secure to the wall. Wall mounted only - high flow rated at 515...

Waterway designer series chrome spa bath suction - low profile. Rated at 454 gpm with vacuum break installed, 356 gpm without vacuum break installedLow profile polished chrome suction cover. 1.5" / 40mm socket elbow...

Straight 40mm slip connection - suits seperately available 40mm / 1.5" street elbow if required.60mm hole size