Suction & Skimmer Fittings - Spas & Spa Baths

Many suction fittings no longer comply with the current standards requiring specific testing and flow rates to be listed. If you don't see your suction fitting here, this is the likely reason.

For new installations and re-plumbs, the use of approved suctions of the correct flow rate is required. 
A pump MUST have a minimum of 2 suction points (or 1 suction and skimmer) each suction having a flow rating equivalent or greater than the pump flow rate. ie combined flow rating of 2 suctions shall be at least double the pumps maximum flow rate.
Some suctions have differing flow ratings depending on installation method and components used.
This category will be undergoing continual change as more suctions become approved.
You must check you pump flow rate requirements when determining the correct suction type required. 
Incorrect pump/suction matching may lead to injury or death. 

Any doubts, please contact us before purchasing suction fittings or use a qualified spa technician. 

See further information below :

• A minimum of two functioning suction outlets per pump must be installed. Suction outlets must be installed a minimum of 600mm apart, as measured from suction pipe center to suction pipe center. 
• Dual suction fittings shall be placed in such locations and distances to avoid "dual blockage" by a user. 
• Dual suction fittings shall not be located on seating areas or on the backrest for such seating areas. 
• The maximum system flow rate shall not exceed the flow rating of any listed suction outlet cover installed. In the event of one suction outlet being completely blocked, the remaining suction outlets serving the system shall have a flow rating capable of the full flow of the pump(s). 
• Never use pool or spa if any suction outlet component is damaged, broken, cracked, missing, or not securely attached. 
•Replace damaged, broken, cracked, missing, or not securely attached suction outlet components immediately. 
•Two or more suction outlets per pump should be installed in accordance with latest standards.

Some suction fittings are available with vacuum break fittings allowing higher flow ratings - this is due to the vacuum break plumbing which, once the suction becomes blocked, will suck air from the vacuum break line / vent into the suction plumbing causing the pump to cavitate and lose suction, thus allowing a trapped person to be freed.

See our pump flow rate information page to help determine suction outlet flow requirements here



Davey Aqua select Suction Cover

SKU: d12424

NO LONGER AVAILABLE Davey Aqua select Spa Bath Suction Cover Use S&P ASF523 white suction cover to replace - the threaded wall fitting will also require replacement (not just the cover). This thread will l...

Edgetec Flexi-Flange Spa & Spa Bath Suction 192 lpm rated.

SKU: e1300

Edgetec suction Australian approved flow rate of 192lpm 100mm diameter cover. Female threaded wall fitting - suits Edgetec suction body only - sold separately. See images for removal of cover. There is a...

From $10.00

Choose Options
In Stock

Edgetec SLP (Super Low Profile) Spa Bath Suction - Chrome

SKU: e1320-ch

Chrome is a coating applied through electrolysis to a base material such as brass or plastic. These parts are chromed plastic...

1 In Stock

$19.40

Edgetec SLP (Super Low Profile) Spa Bath Suction - White 192 lpm rated

SKU: e1320-wh

Approved flow rate of 192 lpm...

4 In Stock

$10.00

Edgetec Spa Bath Suction - Chrome

SKU: e1300-ch

Edgetec spa bath suction face and wall fitting - chrome Face Diameter - 100mm, height off spa bath wall -24mm used on lanark spa baths and others Used in conjunction with one of the Edgetec suction bodies...

8 In Stock

$19.40

Edgetec Spa Bath Suction Adaptor - Straight 1.5"/40mm

SKU: e1340

60mm hole size required 40mm socket...

5 In Stock

$5.00

$5.65

Markon Suction Assembly - Dome Series Super Low profile - Chrome

SKU: mksc0803se2626

Markon Dome series super low profile suction assembly complete - chrome. 91mm OD cover - push click fit suction cover. Approx 8mm projection in from wall of bath at centre of the suction cover. 70mm hole req...

2 In Stock

$44.00

Markon Suction Assembly - Low profile - Chrome - Suits newer Stylus & others

SKU: mksc0503st0726

Markon low profile suction assembly complete - chrome. 100mm OD cover - push click fit suction cover. 70mm hole required. 40mm plumbing Tee body with bung Chrome is a coating applied through electrolysis t...

5 In Stock

$44.00

Markon Suction Body - 90 Elbow, 40mm Slip

SKU: mkse0226-au

Markon 90 degree elbow Suction Body - incorporates a 9mm barb for vacuum relief plumbing if desired (needs to be drilled out, and a length of tubing run above water level) suits the following chrome suction...

10 In Stock

$22.00

Markon Suction Body - Straight 40mm Slip

SKU: mkss0126-au

Markon straight Suction Body - suits the following chrome suction covers - sold separately: mksc0103 2 vane cover mksc0303 2 ring cover Suits 40mm pipe glued into the back. Suits 56mm hole in spa bath...

17 In Stock

$17.60

Markon Suction Body - Tee, 40mm Slip

SKU: mkst0226-au

Markon Tee Suction Body - supplied with 1 x bung to block one port if required - suits the following chrome suction covers - sold separately: mksc0103 2 vane cover mksc0303 2 ring cover Suits 40mm pipe. ...

10 In Stock

$22.00

Markon Suction Cover - 2 Vane - Chrome - Suits Stylus & others

SKU: mksc0103

Replaces the original 3 vane version used by Stylus. Chrome is a coating applied through electrolysis to a base material such as brass or plastic. These parts are chromed plastic...

25 In Stock

$27.50

Markon Suction Cover only - Chrome - Low profile - Stylus and others

SKU: mksc0503

Markon low profile suction cover - chrome. 100mm OD - push click fit suction cover. Chrome is a coating applied through electrolysis to a base material such as brass or plastic. These parts are chromed plas...

5 In Stock

$22.00

S&P Chrome plated ABS Plastic Spa Bath Suction Cover

SKU: wcasf480cp

Replaces many spa bath suctions for chrome upgrade - replaces both plastic and metal suction covers with 3 screws from S&P and Onga - 40mm thread (approx 48mm OD) S&P Supa Suction - CHROME - 40mm BSP thre...

60 In Stock

$38.50

S&P Strip Skimmer - White

SKU: wcasf080

S&P Spa Strip Skimmer - utilized on a vast number of spas for many years - most popular style used. 40mm plumbing - complete with street elbow 237mm high x 110mm wide x 25mm deep 60mm holesize required in sp...

8 In Stock

$29.15

S&P Supa Suction - 40mm Slip - White 192 lpm rated

SKU: wcasf523

S&P Supa Suction - White with 40mm slip fit. With a low rating for flow of 192 litres per minute, it is likely you will need at least 2 of these to suit your pumps flow rate. 85 x 100mm faceplate OD, 48mm I...

15 In Stock

$15.95

S&P Supa Suction - 40mm thread - White 168 lpm rated

SKU: wcasf480

S&P Supa Suction - White - 40mm BSP thread (47mm OD thread) 85mm x 100mm OD faceplate diameter, cover screws are 50mm apart Threads into 40mm BSP faucet adaptor or elbow fittings, or any other female 40mm BS...

7 In Stock

$14.19

Spa Bath Suction Cover Warning Label / Decal

SKU: e11050

Spa bath suction fitting warning label decal - marked with mandatory safety information Oval shape 84mm wide x 52mm high Stick either on the suction fitting or bath adjacent to the suction fitting...

41 In Stock

$1.10

Waterway 10" RETROFIT Ultra Retro Suction Drain

SKU: ww640-2140v

Waterway 10" tru flo drain RETROFIT SUCTION / DRAIN COVER ASSEMBLY - suitable for concrete swimming pool installation where a field built sump / drain setup is used. Frame adaptor screwed to spa / pool wall...

1 In Stock

$137.50

Waterway 10" Tru Flo Drain Cover / Frame

SKU: ww640-1900v

Waterway 10" tru flo drain cover and frame - suitable for concrete swimming pool installation where a field built sump / drain setup is used. Frame embedded in concrete during construction, over sump. 279mm...

5 In Stock

$77.00

Waterway 2" threaded 90 degree elbow suction adaptor

SKU: ww642-3730

Waterway Plastics 90 degree 2" threaded suction adaptor. 2" FPT / BSP female thread x 2" / 50mm socket Screws over the 2" male NPT thread on Waterway 3.5" suction fittings. Also suits any other fitti...

$11.00

Waterway 2.5" 90 degree sweep elbow 2.5"S x 2.5"Spg

SKU: ww411-9140

Waterway 2.5" / 65mm sweep elbow - socket x spigot. Suitable for suction fittings, pump connections, etc to maximise flow...

24 In Stock

$12.10

Waterway 2.5" Spigot x 2" Socket reducing adaptor

SKU: ww642-3680

Waterway 2.5" spigot x 2" / 50mm socket reducing adaptor - can be used with 2.5" Waterway suctions to reduce to 2" plumbing. Also used with 2.5" Waterway Wye when splitting multiple suctions on swim systems...

38 In Stock

$11.00

Waterway 3.5" Ultra Hi-Flo Suction - 454 lpm rated 1.5" Socket

SKU: ww640-3497vp

Waterway 3.5" Ultra Hi-Flo suction - White or Grey Flow rated 454 litres per minute 60mm hole size required, 94mm cover diameter, projection of 52mm into spa. Replaces all suctions with up to 60mm hole in t...

From $33.00

Choose Options
In Stock

Waterway 3.5" Ultra Hi-Flo Suction - grey 454 lpm rated with 90 degree ell 2" Socket

SKU: ww640-349xvp2ell

Waterway 3.5" Ultra Hi-Flo suction with 90 degree elbow & 2" socket Flow rated at 454 lpm 60mm diameter hole required, 94mm cover diameter, 50mm projection into spa....

From $39.60

Choose Options
In Stock

Waterway 32" Ultra Strip Drain / Suction - for Fibreglass & Vinyl lined spas & pools - up to 1330 lpm / 352 gpm- grey

SKU: ww640-1307v

Waterway 32" Ultra Strip Drain / Suction - grey for use in fibreglass and vinyl lined pools / spas Wall mounted - flow rated at 1120 lpm with two ports Floor mounted - flow rated at 1330 lpm with two ports 8...

2 In Stock

$660.00

Waterway 32" Ultra Strip Drain / Suction - for Field Built Sump - up to 1330 lpm / 352 gpm - white

SKU: ww640-1330v

Waterway 32" Ultra Strip Drain / Suction - white for use in concrete pools / spas with field built sumps Wall mounted - flow rated at 1120 lpm with two ports Floor mounted - flow rated at 1330 lpm with two ...

4 In Stock

$330.00

Waterway 5" Super Hi Flo Suction 2" S - 680lpm to 950 lpm rated - Grey

SKU: ww640-3787v

Waterway 5" Super Hi-Flo suction with 2"/50mm socket Massive 950 litres per minute flow rated for high output spa and swimjet pumps in portable spa installations. (All other installations ie swimming pool,...

14 In Stock

$41.25

Waterway 5" Super Hi-Flo Suction 2" S - Stainless Steel 681 lpm

SKU: ww640-3570sv

Waterway 5" Super Hi-Flo suction fitting with stainless steel cover rated at 681 lpm flow 2" / 50mm Socket....

19 In Stock

$60.50

Waterway 5" Super Hi-Flo Suction 2.5" Socket 680 lpm up to 950 lpm rated

SKU: ww640-3797v

Waterway 5" Super Hi-Flo suction with 2.5" socket Massive 950 litres per minute flow rated for high output spa and swimjet pumps in portable spa installations. (All other installations ie in-ground, deck, ...

7 In Stock

$60.50

Waterway 5" Super Hi-Flo Suction 680 lpm up to 950 lpm rated with 90 degree Ell 2" Socket

SKU: ww640-3587v642-3700

Waterway 5" Super Hi-Flo suction with 2.5" Spg x 2" socket 90 degree elbow adaptor. 950 lpm rated in self contained portable spa, 680 lpm rated in all other applications 130mm diameter cover, 38mm projecti...

$42.00

Waterway 5" Super Hi-Flo Suction with straight Vacuum Break Fitting 878 lpm

SKU: ww640-3587v642-3680v

Waterway 5" super hi-flo 2.5" suction fitting with straightr 2" socket adaptor vacuum break. Vacuum break 3/4" barb connection MUST be correctly connected and activated to achieve higher flow rating of 878 l...

7 In Stock

$38.01

Waterway 5" Super Hi-Flo Suction with Vacuum Break Fiiting 878 lpm

SKU: ww640-3587v642-3700v

Waterway 5" super hi-flo 2.5" suction fitting with 2" socket adaptor vacuum break 90 degree elbow. Vacuum break 3/4" barb connection MUST be correctly connected and activated to achieve higher flow rating of...

7 In Stock

$38.01

Waterway 5" Super Ultra Hi-Flo Suction 2"S 848 lpm up to 999 lpm

SKU: ww640-3947vp

Waterway 5" Super Ultra Hi-Flo suctions made for portable spa applications - MASSIVE flow rating of 999 lpm for portable spa installation. All other installations these suctions still have an extremely high...

From $41.80

Choose Options
In Stock

Waterway 5" Super Ultra Hi-Flo Suction 2.5" Socket 848 lpm up to 999 lpm

SKU: ww640-3937vp

Waterway 5" super ultra hi-flo suction fitting with 2.5" / 65mm socket for plumbing connection. Rated to a MASSIVE 999 lpm for applications where installed in portable spas or swim spas. Perfect for swimjet ...

36 In Stock

$41.80

Waterway 6" Ultra Suction 1.5" / 40mm Slip Fit 291 lpm

SKU: ww640-8270v

Waterway 6" Ultra Suction - white, black, or beige - self aligning slip fit design to push inside Australian 40mm pressure pipe. Screw supplied to secure to the wall. Wall mounted only - flow rated at 291 l...

From $88.00

Choose Options
In Stock

Waterway 6" Ultra Suction 2" / 50mm Slip Fit 515 lpm

SKU: ww640-8280v

Waterway 6" Ultra Suction - white, black or beige - self aligning slip fit design to glue inside Australian 50mm pressure pipe. stainless screw included to secure to the wall. Wall mounted only - high flow ...

From $88.00

Choose Options
In Stock

Waterway Designer Series Bath Suction Assembly - Chrome

SKU: ww643-4460-pc-kit

Waterway designer series chrome spa bath suction - low profile. Rated at 454 lpm with vacuum break installed, Rated at 356 lpm without vacuum break installed (capped off) Low profile polished chrome sucti...

42 In Stock

$27.01

Waterway Designer Series Bath Suction Assembly - Chrome - Complete Safety Vacuum Kit

SKU: ww643-4460-pcvackit

The safest spa bath suction assembly available! Waterway designer series chrome spa bath suction safety vacuum kit - low profile. Kit includes parts as pictured - Suction assembly, 1m of tubing, 2 x b...

18 In Stock

$40.00

Waterway Extended Thread HOT TUB 3.5" Ultra Hi-Flo Suction - 454 lpm rated with 90 degree ell 2" Socket

SKU: ww640-3497vp2elltub

Extended thread Timber Hot Tub Suction Fitting - suits up to 50mm wall/stave thickness - perfect for cedar hot tubs Waterway 3.5" Ultra Hi-Flo suction with 90 degree elbow & 2" socket Flow rated at 454 lpm ...

From $82.50

Choose Options
Backorder

Waterway Extended Thread Timber Hot Tub Strip Skimmer with 2" 90 elbow

SKU: ww640-69202elltubx

Timber hot tub White or Grey Waterway strip skimmer suits wall / stave thickness up to 60mm 2" threaded elbow 60mm hole size. Maximum wall thickness - approx 60mm N.B. This strip skimmer does NOT have flow ...

From $77.00

Choose Options
Backorder

Waterway front Access Spa / Pool Skimmer - white

SKU: ww510-1500

Waterway Weir skimmer for use in fibreglass and concrete spas and pools. Hole size required - 150mm wide x 130mm high. Face dimensions - 195mm wide x 185mm high Supplied with mounting screws or you can bol...

$165.00

Waterway front Access Spa / Pool Skimmer - white with Stainless Steel Fascia

SKU: ww510-1500916-1010

Waterway Weir skimmer with stainless steel fascia - for use in fibreglass and concrete spas and pools. Hole size required - 150mm wide x 130mm high. Face dimensions - 195mm wide x 185mm high Supplied with ...

$200.00

Waterway front Access Spa / Pool Skimmer with 10 sqft cartridge - Grey

SKU: ww510-1607

Waterway Weir skimmer for use in fibreglass and concrete spas and pools. Hole size required - 150mm wide x 130mm high. Face dimensions - 195mm wide x 185mm high Supplied with mounting screws or you can bol...

9 In Stock

$220.00

Waterway Hi Flo Suction Fitting with 1.5" 90 Ell Vacuum Break 348 lpm

SKU: ww640-3487v

Waterway Hi Flo suction fitting with 1.5" 90 ell and integral vacuum break. The vacuum break MUST be correctly installed and active to achieve the specified 348 lpm flow rating. Flow rate WITHOUT the vac bre...

From $36.30

Choose Options
In Stock

Waterway Strip Skimmer - Grey

SKU: ww640-6927

Straight 40mm slip connection - suits 40mm / 1.5" pipe. 60mm hole size. Maximum wall thickness - approx 30mm - suits thick walled timber and marble tubs (timber stave will likely require honing to suit.) N....

13 In Stock

$48.40

Waterway Strip Skimmer - White

SKU: ww640-6920

White Waterway strip skimmer - Straight 40mm slip connection - suits 40mm / 1.5" pipe. 60mm hole size. Maximum wall thickness - approx 30mm - suits thick walled timber and marble tubs (timber stave will lik...

4 In Stock

$48.40

Waterway Strip Skimmer with 90 elbow

SKU: ww640-69273300x

Grey or white Waterway strip skimmer - Straight 40mm slip connection with 40mm/1.5" street elbow - glues inside the skimmer fitting - suits 40mm / 1.5" pipe. 60mm hole size. Maximum wall thickness - approx ...

From $53.90

Choose Options
In Stock

Waterway Suction Vacuum Vent Fitting

SKU: ww640-3757v

Waterway suction vacuum vent fitting with 4 x 3/4" barbs to suit up to 4 tubes for interconnection to spa safety suctions with vacuum break requirements usually due to needing higher flow rates. Usually des...

4 In Stock

$11.94