15A-25A WIFI Controlled Spa or Pump/Blower Timer / Isolator

Bluetooth / WiFi control from IOS and Android phones / devices with dedicated App 
Manual On / Off button 

Power On or Off to your spa remotely  
Set timeclock for desired daily run times and prevent running at night if pump noise disturbs neighbours 
or
Set a time off delay to automatically isolate the spa after a preset time 

Energy monitoring - you can monitor your spas energy consumption via the App 

Hard wired by your electrician - Should be mounted with the spa isolation switch on the house wall/post for easy access to manual operation if desired 

25A Maximum load
230-250v, 50/60Hz 

NB. When power is interrupted to some spas the following may occur making this device potentially impractical for your installation due to loss of settings:
Set temperature may revert to a specific temperaturemperature such as 35c 
Timeclock might reset 
Filter times might reset 
Prior to purchase please assess your particular spas characteristics to see if there are changes that may be impacted with this device. You can do so by turning power off to the spa for 30-60 mins, re-energise and check what if any settings have reset, and what remains unchanged. In particular if the set temp and timeclock remain correct, the use of this device will not be an issue.