1.5" / 40mm Pipe Extender External - Repair Fitting

1.5" / 40mm Pipe Extender External.
Use this repair fitting in order to replace a broken union, elbow, or any other 1.5" fitting without having to extend the existing pipe after cutting it from the fitting (effectively making the pipe too short).
This pipe extender glues OVER the pipe increasing its length back to the original length so that when its subsequently glued into the replacement fitting, there will be no change to position of plumbing components.
Suits use when any type of 1.5" / 40mm fitting has been broken or Joint is leaking, including :
Pump or heater unions,
Couplings, elbows or bends
Diverter valves, isolation valves and all other fittings with a 1.5" / 40mm socket.

Suits all 1.5" or 40mm pipe classes

Overall length of fitting = 65mm
Socket depth = 31mm
Spigot length = 31mm
4mm gap required.