APR 800 V2 Spa Air Blower WITH Air Switch

LX APR800V2 spa air blower WITH air switch built in.

Note - this air blower must be installed in a location protected from the weather / moisture

APR series air blowers have a 1.5" / 40mm threaded union for easy blower loop pipe connection. *Beware glue fumes - see further info below.
Supplied standard with standard 3 pin cat 38 plug/lead and built in airswitch
Supplied with 2m of air tubing - not suited to longer runs
(separate air button required to operate the blower - not included - this provides simple on/off control)

230v, 50Hz, 880w, 4A dual stage fan for greater pressure operation up to 1000mm water depth. 700w motor and 180w heater element.

Suitable replacement for almost all alternate spa blowers with 'stated' ratings of 850-1100w
285mm long including threaded union, 170mm high, 170mm wide.

*CAUTION - Do not connect the blower after gluing the union to the pipework as glue fumes may enter the blower and will result in an explosion if the motor is started. Best practice is to glue the union to the pipe with blower disconnected. Either connect the blower once it is already running or wait 1hour before screwing the union onto the air blower*

2 year warranty on LX blowers