Australian Spa Parts

Cover Lifters - Spa cover removal systems and re-fitting aids

Enable one person handling of spa covers even on the biggest spas, with ease

Spa Cover Lifters - Aid in the removal and refitting of spa covers without risk of abrasion damage on the ground. Especially suited to spa users on their own - easy one person operation. There is a variety available to suit your application, including in-deck spas where there is no room down the side of the spa cabinet.
Some models suit almost all spa shapes, others are not suitable, such as installation on spas with large radius corners or hexagonal, or round in shape.

We encourage proper handling of your cover and lifter to prolong the life of both accessories.
Many cover lifter suppliers and instruction manuals will state operation of the lifter with one person at the side of the spa - whilst this is satisfactory for some situations, we believe it best to operate the lifting system from within the spa at the centre of the cover to spread the load and stress evenly. Warranty on our lifters does not cover damage as a result of incorrect lifting procedures.

The correct method of use for all cover lift systems -

Fold the cover on itself, climb into the spa - from the centre of the cover, push back and up to lift the cover evenly until its final position is reached. Replacing the cover should be a reversal of this procedure. Any other single person operation may result in cover lift system failure or damage.