Spa Bath Air Venturi Controls
Edgetec air control valve - ReActive - 2 versions: Scalloped E1250-ch or Smooth E1200-ch Diameter - 45mm, hole size required - 25mm 1 x 3/8"/9mm hose connection - run around spa jets in a ring main C...
Chrome is a coating applied through electrolysis to a base material such as brass or plastic. These parts are chromed plastic...
34 In Stock
Markon Dome Series air control assembly - 3/4 length handle design. 46mm diameter, 32mm hole diameter required. 2 x 9mm barbs. Chrome is a coating applied through electrolysis to a base material such as bras...
13 In Stock
Markon standard top draw (air is sucked in from under the cap, above the spa shell) air control valve The chrome cap can fully unscrew anti-clockwise. 46mm diameter cap 32mm hole required. 15mm / 0.5" so...
14 In Stock
This is a REPLACEMENT KIT for complete assembly replacement of onga classic air controls - this kit suits the existing 25mm hole in the spa shell. Utilising Edgetec air venturi control, and a 1/2"/15mm coup...
11 In Stock
This is a REPLACEMENT KIT for complete assembly replacement of onga classic air controls - this kit suits the existing 25mm hole in the spa shell. Utilising Edgetec air venturi control, a 1/2"/15mm coupling...
6 In Stock
Found on older spa baths - 32mm diameter threaded cap - 26mm OD thread on the body - 18.3mm OD thread on the screw in cap. O-ring seal is recessed in groove on underside of cap. The body is designed to t...
62 In Stock
Mainly used on spa baths - chrome cap does a 1/4 turn On/Off 40mm diameter cap, 27mm diameter hole required Designed for 25mm pressure pipe to glue inside the body under the spa Chrome is a coating applied...
28 In Stock
Common air control used over last 15+ years. The top unscrews completely, air intake from above spa lip - 1/2" or 15mm slip fit for pipe or threaded socket adaptor added for 1" / 25mm pipe connection...
29 In Stock
Waterway bath air control with smooth cap. 49mm diameter cap, 33mm hole required. 10mm thickness max. 1/2" / 15mm horizontal socket. 3/4" barb adaptor could be used to plumb 3/4" barbed manifolds with 6 por...
33 In Stock