S&P Supa Suction - 40mm Slip - White 192 lpm rated

S&P Supa Suction - White with 40mm slip fit.

With a low rating for flow of 192 litres per minute, it is likely you will need at least 2 of these to suit your pumps flow rate.

85 x 100mm faceplate OD, 48mm ID slip (40mm pipe) x 59mm OD thread.
60mm hole size required, cover screws are 50mm apart
Maximum wall thickness is approx 30mm - may also suit timber and marble tubs.

Australian Approved flow rate of 192 litres per minute .
Caution - many pumps exceed this flow rate. Multiple suctions of this type may need to be fitted.

Can be used to replace Davey Aquaselect suction covers that are no longer available.